Ham Goodies
Show:
Sort By:
A 100pf capacitor for use with End-Fed Half-Wave Couplers. Rated at 15kV.
This is soldered across..
£2.75
A pack of 10 tactile push-buttons for use with Strip/Veroboard, Breadboard projects. These are..
£1.50
A 13pin DIN accessory connector for Icom and Kenwood transceivers.
Icom: IC-7100, IC-7300, IC-..
£2.75
When you bring balanced feeder into the Shack, it's good practice to use a Choke/Balun to interface ..
£20.00
We have a few of the FT240-31 with 8-turns, 30cm length remaining - offered here at a slight saving ..
£18.00
When you bring balanced feeder into the Shack, it's good practice to use a Choke/Balun to interface ..
£32.00
A general-purpose 1:1 Current Balun for use on HF with your 100w transceiver. This design uses..
£40.00 £35.00
It's a bit of an animal - actually, it's a lot of an animal - Featuring a revised design as pa..
£55.00
This is a 1:1 Balun/Choke that is offered unbranded for resale and is sold on a MOQ of 5 units. ..
£30.00
A 1:1 "micro" Balun for use on HF (best suited for 7-30MHz) for when you're out portable or need a l..
£18.00
A 2:1 Voltage Balun for use with a resonant full-wave loop which is typically around 100-ohms at its..
£42.00
This is a built+tuned version of our popular 2m Slim-Jim Kit product. We've done the hard work..
£25.00
The Slim-Jim is a classic - equally at home whether it's up a telescopic pole or hanging from a holi..
£14.00
A 4:1 Current Balun (Guanella) for use with OCFD, Loops and other situations where your aerial is ar..
£55.00
A 5mm Snap-on ferrite clip for keeping RF out of keyboards/mice and other Shack peripherals. Works w..
£1.00
Cookies may be stored on your computer by this site for the purposes of auto-login and checkout