4:1 Current Balun QRO

4:1 Current Balun QRO
Brand: Ham Goodies
Product Code: HG-BAL41
Availability: 2
Price: £45.00
Qty:     - OR -   Add to Wish List
Add to Compare

A 4:1 Current Balun (Guanella) for use with OCFD, Loops and other situations where your aerial is around 200ohms. Do not be fooled by cheap (and poor design) single-core versions - only a twin-core will work as an effective Current Balun.  This means that you won't need any further choking (loops of coax, ferrite rings etc).

Best use for this is at the end of your 300/450-ohm feeder before a short run of coax to your antenna tuner.  This 4:1 balun is more robust than the flimsy ones found in many low-end tuners and certainly doesn't use iron-powder cores (see note below).

  • Designed for 5MHz to 30MHz (reduced choking on 80m)
  • 400-watt rating
  • 2x FT240 ferrite cores
  • SO239 connector
  • 120x80xx40mm
  • Filled with potting-compound for a complete weather-proof solution
  • Weight: 585g

If you're using a Doublet or G5RV, a balun with a 1:1: ratio is advised unless you know the impedance of your aerial will benefit from a 4:1 ratio at the frequencies of interest. Our 1:1 Choke/Balun is availabe in either 100w or 400w versions.

Choosing a Balun
We are often asked "what balun should I use?" by customers - here's our simple guide to choosing the right one:

  • Resonant dipole, coax-fed - 1:1 Choke Balun (we have 100w and 400w versions)
  • Doublet fed with ladder-line - 1:1 Choke Balun or 4:1 Current Balun (most times, a 1:1 is preferable)
  • Random/long-wire down the garden (or up a pole) - UnUn, 9:1 is the common ratio, but our model offers 4, 9 and 16:1
  • Choking Coaxial Cable - 1:1 Line Isolator
Cookies may be stored on your computer by this site for the purposes of auto-login and checkout