End-Fed Half-Wave Coupler 1kW

This is the big one - It's part of our new "Elite" range and features 3 stacked FT290 cores for those regularly running #MoreCowbell (up to 1000-watts).

FIRST 5 UNITS AT THIS DISCOUNT PRICE

The End-Fed Half-Wave (aka: EFHW) is a popular choice for simple /P operating, but it can also be used equally well at home where a single wire down the garden won't attract too much attention.  This type of matching device transforms the high impedance of a half-wavelength wire down to the 50-ohms expected by your transceiver.

A ground terminal is also provided should you wish to add a counterpoise.

A top-mounted eye-bolt allows for hanging/tying from a pulley, pole or suitable wall-fixing, a side eye-bolt provides strain-relief for the wire.  A fixed mast-mounting plate secures the box using a V-bolt to any pole up to 2" diameter.  No extra hardware is needed, and you even get spares!

• 1000-watt rating
• 49:1 ratio on 3x stacked FT290 (2.9") ferrite cores
• SO239 coax input and M4 (4mm) terminals for aerial+counterpoise
• 165x130x80mm
• Fully weather-proof with stainless-steel fixings
• Weight: 1.2kg
• FREE instruction sheet with tips/tricks plus spare set of M4 fixings (wing-nuts, crimp-spade, washers)

Wire Lengths - we do not sell/supply wire
Approx 21m will be resonant on the 40m, 20m, 15m and 10m bands.  Approx 42m of wire will present a low (under 3:1) SWR on most bands 80m-10m - hopefully bringing it into range of a radio's internal ATU.  You can also add "traps" along the way if you want to get creative with wire lengths.  More details are given in the supplied info sheet.

Our standard "250-watt" and 800-watt models remain available...and, if you'd prefer a "random" end-fed wire matching device, we also produce a 9:1 Unun (250w) and QRO 400w version.